Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Incline and turn the antenna. Reduce its length if the signal is too strong (very close to a transmitter). – For AM, the set is provided with a built-in antenna so the telescopic antenna is not needed. Direct the antenna by turning the whole set. 5. To switch off, adjust the POWER slider to TAPE/OFF position with the keys on the tape deck released. ™The function indicator goes out. Programming radio stations You can store up to a total of 30 radio stations in the memory. 1. Tune to your desired station (see Tuning to radio stations). 2. Press PROG to activate programming. – Display: PROGRAM flashes. 3. Press PRESET 4 or 3 once or more to allocate a number from 1 to 30 to this station. 4. Press PROG again to confirm the setting. – Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown. 5. Repeat the above four steps to store other stations. – You can erase a preset station by storing another frequency in its place. Tuning to preset stations Press PRESET 4 or 3 until the desired preset station is displayed. English SHUFFLE ALL PROG. BATTLOW MODE TAPE TUNER CD STOP PLAY•PAUSE S E A R C H • • • • • • S E A R C H DIGIT STEREO FM SHUFFLE ALL PROG. BANDPRESET BATTLOW TAPE TUNER STOP S E A R C H • • • FLEALL RECORD AY PROG. BANDPRESET BATTLOWTUNER 11 CD PLAYER English Playing a CD 1. Select CD source. ™ is displayed briefly and the function indication lights up. 2. Press OPEN•CLOSE to open the CD door. ™Display: when you open the CD door. 3. Insert a CD or CD-R(W) with the printed side facing up and close the CD door. ™Display: flashes as the CD player scans the contents of a CD. The total number of tracks and playing time are then shown. 4. Press PLAY•PAUSE 2; to start playback. ™Display: Current track number and elapsed playing time of the track during CD playback. 5. To interrupt playback press PLAY•PAUSE 2;. Press PLAY•PAUSE 2; again to resume play. ™The display freezes and the elapsed playing time flashes when playback is paused. 6. To stop CD playback, press STOP 9 7. To switch off, adjust the POWER slider to TAPE/OFF position with the keys on the tape deck released. ™The function indicator goes out. Note: CD play will also stop when: – the CD door is opened; – the CD has reached the end (unless you have selected REPEAT or REPEAT ALL); – you select another source: TAPE / TUNER. Selecting a different track • Press SEARCH . or § once or repeatedly until the desired track number appears in the display. • If you have selected a track number shortly after loading a CD or in the PAUSE position, you will need to press PLAY•PAUSE 2; to start playback. Finding a passage within a track 1. Press and hold down on SEARCH . or §. ™The CD is played at high speed and low volume. 2. When you recognize the passage you want, release SEARCH . or §. – Normal playback continues. RECORD PLAY SEARCH STOP-OPEN PAUSE DBB TUNER NAMICBASSBOOST CD TAPE AZ1060 CDRADIOCASSETTERECORDER SHUFFLE ALL PROG. BATTLOW MODE TAPE TUNER CD STOP PLAY•PAUSE SEARCH • • • •• •SEARCH DIGI ALL PROG. BATTLOW MODE TAPE TUNER CD STOP PLAY•PAUSE SEARCH • • • • • • SEARCH DIGITALTUNEBASS REFLE SHUFFLE ALL PROG. BATTLOW MODE TAPE TUNER CD STOP PLAY•PAUSE SEARCH • • • • • • SEARCH DIGITALBA Note: During a CD program or if SHUFFLE/ REPEAT active, searching is only possible within a track. 12 CD PLAYER Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM. SHUFFLE - tracks of the entire CD/ program are played in random order SHUFFLE and REPEAT ALL - to repeat the entire CD/ program continuously in random order REPEAT ALL - to repeat the entire CD/ program continuously REPEAT - repeats the current track continuously 1. To select your play mode, press the MODE button before or during playback until the display shows the desired function. 2. Press PLAY•PAUSE 2; to start playback if in the STOP position. 3. To return to normal playback, press the respective MODE button until the various SHUFFLE/ REPEAT modes are no longer displayed. – You can also press STOP 9 to cancel your play mode. Programming track numbers Program in the STOP position to select and store your CD tracks in the desired sequence. If you like, store any track more than once. Up to 20 tracks can be stored in the memory. 1. Use the SEARCH . or § to select your desired track number. 2. Press PROG. ™Display: PROGRAM and the selected track number appears briefly. ™If you attempt to program without first selecting a track number, is shown. 3. Repeat steps 1-2 to select and store all desired tracks. ™ is displayed if you attempt to program more than 20 tracks. 4. Press PLAY•PAUSE 2; to start playback of your CD program. Reviewing the program In the stop position, press and hold down PROG for a while until the display shows all your stored track numbers in sequence. SHUFFLE ALL BATTLOW MODE TAPE TUNER CD STOP PLAY•PAUSE SEARCH • • • • • • SEARCH SHUFFLE ALL ...