Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
* If your Wi-Fi password contains such special characters as #/:/;/', you need to change your password. 9 Name your wireless Hi-Fi receiver as you like, and then tap OK to connect AW2000 to your home Wi-Fi network. 10 Wait until the power/status indicator on AW2000 turns solid white. »»The following app screen appears. »»AW2000 is connected to your home Wi-Fi network successfully. Tip ••After successful network setup, you can tap Rock n' Roll on the above app screen to get ready for music play directly. For more details, go to the 'Play' section (see 'Play' on page 16). Option 2: Set up through a non-WPS Wi-Fi router and Android device 1 Before setup, make sure that your Android device is connected to your home Wi-Fi network. English EN 2 Read the Wi-Fi setup instructions on the app. 3 As instructed, briefly press WI-FI SETUP on the back of AW2000. »»The power/status indicator starts to blink amber and white alternately. »»A new Wi-Fi network created by AW2000 will appear, with the network name (SSID) of Philips_Install. < 30S< 3S 4 Tap Next on the above app screen. »»Your Android device starts to connect with the new Wi-Fi network created by AW2000 automatically. 5 Wait until the wireless Hi-Fi receiver is found. EN 6 Select your home Wi-Fi network and then tap Next. 7 Enter the password of your home Wi-Fi network, and then tap Next. * If your Wi-Fi password contains such special characters as #/:/;/', you need to change your password. 8 Name your wireless Hi-Fi receiver as you like, and then tap OK to connect AW2000 to your home Wi-Fi network. 9 Wait until the power/status indicator on AW2000 turns solid white. »»The following app screen appears. »»AW2000 is connected to your home Wi-Fi network successfully. English EN Note ••After successful network setup, you can tap Rock n' Roll on the above app screen to get ready for music play directly. For more details, go to the 'Play' section (see 'Play' on page 16). Option 3: Set up wireless connection to `a WPS router 1 Tap WPS Setup? on the app screen . 2 Read the WPS setup instructions. 3 As instructed, press and hold WI-FI SETUP on the back of AW2000. »»The power/status indicator blinks amber and green alternately. > 4S EN 4 Press the WPS button on your home Wi-Fi router. WPS 5 Wait until the power/status indicator on AW2000 turns solid white, then tap Next on the app screen.. »»The following app screen appears. »»AW2000 is connected to your home Wi-Fi network successfully. Tip ••For some Wi-Fi routers, you may need to hold the WPS button for Wi-Fi connection or enable the WPS PBC function from the router configuration pages. See the user manuals of the specific routers for details. ••After successful network setup, you can tap Rock n' Roll on the above app screen to get ready for music play directly. For more details, go to the 'Play' section (see 'Play' on page 16). Option 4: Set up wired connection through an Ethernet cable Note ••If you use wired connection, you just need to select Speaker already setup on the initial Setup page (see 'Download Philips AirStudio to your smartphone or tablets' on page 6). 1 If you have tried wireless connection, before setup of wired connection, you need to reset the wireless Hi-Fi receiver (see 'Troubleshooting' on page 26). 2 Connect an Ethernet cable (not supplied) to: • the ETHERNET socket on the back of the device • one of the Ethernet ports on your home Wi-Fi router LAN4To Modem12V=1AResetLAN3LAN2LAN1ETHERNETETHERNET 3 Wait until the power/status indicator turns solid white. »»AW2000 is connected to your home Wi-Fi network successfully. English EN 5 Play Stream audio to AW2000 Stream from your iOS or Android smartphone or tablet 1 Make sure that your iOS/Android device is connected to the same Wi-Fi network as AW2000. 2 Run Philips AirStudio on your iOS or Android smartphone or tablet. 3 If the following screen does not appear, select Speaker already setup on the initial Setup page. »»Your smartphone or tablet starts to search for the wireless Hi-Fi receiver on the same Wi-Fi network. 4 After the icons of both the iOS/Android device and the wireless Hi-Fi receiver appear, hold and drag the icon of your iOS/ Android device towards the wireless Hi-Fi receiver to set up connection between them. 5 Select a list mode to show music available for streaming. EN 6 Select your favorite music to start play. Tip ••If the power/status indicator flashes white, it indicates that AW2000 is muted. Adjust volume on AW2000 or your iOS/Android device to resume sound output. ••If you find that the icon of either the iOS/Android device or wireless Hi-Fi receiver does not appear at step 3, you can tap -> Refresh to refresh the screen display. Stream from your PC/Mac To stream music from your PC/Mac to AW2000, you need to install a DLNA certified media sharing software (such as Media Manager available on or Windows Media Player 11+) onto your PC/Mac first. In this way, your PC/Mac can work as a media sharing ser...