Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Connect FM antenna Tip " For optimal reception, fully extend and adjust the position of the antenna. " For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA socket. " The unit does not support MW radio reception. " Connect the supplied FM wire antenna to the FM ANTENNA socket on the unit. Connect speakers Note " Insert the stripped portion of each speaker wire into the socket completely. " For optimal sound, use the supplied speakers only. " Connect only speakers with impedance that is the same or higher than the supplied speakers. " The DEMO jack is only applicable to the demo unit that is not included in the apparatus. Do not attempt to connect any other device to the apparatus through this jack. For the main unit side: 1 Unscrew the speaker connectors. 2 Insert fully the red end of a speaker cable into the left red (+) connector. 3 Screw the left red (+) connector to secure the cable. 4 Insert fully the silver end of a speaker cable into the left black (-) connector. 5 Screw the left black (-) connector to secure the cable. 6 Repeat steps 2-5 to insert the other speaker cable into the right connectors. For the speaker side: 1 Unscrew the speaker connectors. 1 2 3 12 EN Option 2: Connect to the composite video jack 1 Connect a composite video cable to: " the VIDEO (VIDEO OUT) jack on this unit. " the VIDEO input jack on the TV. 2 Connect the audio cables to: " the LINE OUT-L/R jacks on this unit. " the AUDIO input jacks on the TV. Tip " The video input jack on the TV might be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND. Route audio to other devices You can route the audio from this product to other devices. VIDEO OUT VIDEO Connect video/audio cables Select the best video connection that the TV can support. " Option 1: Connect to the HDMI jack (for an HDMI, DVI or HDCP-compliant TV). " Option 2: Connect to the composite video jack (for a standard TV). Option 1: Connect to the HDMI jack 1 Connect an HDMI cable (not supplied) to: " the HDMI (DIGITAL AV OUT) jack on this product. " the HDMI input jack on the TV. Tip " If the TV has a DVI connector only, connect via an HDMI/DVI adaptor. Connect an audio cable for sound output. " If this product connects to a TV compatible with 1080p or 1080p/24Hz, Philips recommends HDMI category 2 cable, also known as High Speed HDMI cable, for optimal video and audio output. " This type of connection provides the best picture quality. HDMI IN EN 13 English 1 Connect a coaxial cable (not supplied) to: " the COAXIAL (DIGITAL OUT) jack on this unit. " the COAXIAL/DIGITAL input jack on the device. Connect an analogue stereo system 1 Connect the audio cables to: " the LINE OUT-L/R jacks on this unit.the AUDIO input jacks on the device. Route audio from other devices Route audio from TV or other devices Use this product to play audio from the TV or other device such as a cable box. AUDIO IN R L Connect to an HDMI-compliant AV ! 1 Connect an HDMI cable (not supplied) to: " the HDMI (DIGITAL AV OUT) jack on this unit. " the HDMI jack input jack on the device. Tip " The HDMI connection provides the best audio quality. " #$ ! receiver COAXIAL COAXIAL 14 EN Connect power Caution " Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. " Before connecting the AC power cord, make sure that you have completed all other connections. " Connect the AC power cord to " the AC MAINS~ socket on this unit. " the wall power socket. Tip " Press MP3 LINK/AUX to select the audio output of your connection. Listen to an audio player You can listen to an audio player through this unit. " Connect the supplied MP3 Link cable to the MP3 LINK socket and to the headphone socket on the audio player. Tip " Press MP3 LINK/AUX to select the audio output of your connection. LINE OUT AUX IN R R L L LINE OUT AUX IN R R L L MP3-LINK 4 Get started Caution . Use of controls or adjustments or per formance of procedures other than herein may result inhazardous radiation exposure or other unsafeoperation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Prepare the remote control 1 Press and push the batter y compar tment to slide it open (see “1” in the illustration). 2 Inser t two AA A batteries with correct polarity (+/-) as indicated. 3 Push and slide back the batter y compar tment (see “3” in the illustration). Note . The batteries shall not be exposed to excessive $ !% . If you are not going to use the remote control for a long time, remove the batteries. . Do not mix batteries (old and new or carbon and alkaline, etc.). . Batteries contain chemical substances, so theyshould be disposed of properly. Turn on 1 Press ....