Оценок - , средний балл: ( )

Инструкция по эксплуатации Sony, модель SS-MF500H

Производитель: Sony
Размер: 88.84 kb
Название файла:

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

2 Mid range: 8 cm (3 1/4 in.), cone type Tweeter: 2.5 cm (1 in.), balance dome type Enclosure type Bass reflex Rated impedance 8 ohms Power handling capacity Maximum input power: 180 watts Sensitivity level 89 dB (1 W, 1 m) Frequency range 40 Hz - 50,000 Hz Cross over frequency 5,000 Hz, 7,000 Hz Dimensions (w/h/d) Approx. 220 . 950 . 230 mm (8 3/4 . 37 1/2 . 9 1/8 in.), not including front grille Finish Black foil laminated Mass Approx. 12.5 kg (27 5/8 lb) Supplied accessory Speaker cord 2.5 m (8 ft.) (2) Design and specifications are subject to change without notice. SS-MF500H Systeme d’enceintes 3 voies, blindage magnetique Haut-parleurs Woofer: 16 cm, type conique . 2 Medium: 8 cm, type conique Tweeter: 2,5 cm, type dome d’equilibrage Type d’enceinte Bass reflex Impedance nominale 8 ohms Capacite de puissance admissible Puissance d’entree maximum: 180 W Niveau de sensibilite 89 dB (1 W, 1 m) Plage de frequences de 40 a 50.000 Hz Frequence de recoupement 5.000 Hz, 7.000 Hz Dimensions (l/h/p) Env. 220 . 950 . 230 mm, grille avant non comprise Finition Contreplaque noir Poids Env. 12,5 kg Accessoire fourni Cordon d’enceinte 2,5 m (2) La conception et les specifications sont modifiables sans preavis. SS-MF500H Sistema de altavoces de 3 vias, magneticamente apantallados Unidades altavoces fuertes De graves: 16 cm (tipo cono) . 2 Gama de frecuencias medias: 8 cm (tipo cono) De agudos: 2,5 cm (tipo domo de balance) Tipo de caja acustica Reflectora de graves Impedancia nominal 8 ohmios Potencia admisible Potencia maxima de entrada: 180 W Sensibilidad 89 dB (1 W, 1 m) Gama de frecuencias 40 - 50.000 Hz Frecuencia de cruce 5.000 Hz, 7.000 Hz Dimensiones Aprox. 220 . 950 . 230 mm (an/al/prf), sin incluir la rejilla frontal Acabado Laminacion con hoja negra Peso Aprox. 12,5 kg Accesorios suministrados Cable para el sistema de altavoces 2,5 m (2) Diseno y especificaciones sujetos a cambios sin previo aviso. • Before connection, turn off the amplifier to avoid damaging the speaker system. • This speaker system is driven best by an amplifier or receiver rated as per the wattage indicated in the specification section. A low-powered amplifier could result in signal clipping which could result in tweeter burn-out. Therefore, it is recommended to use an amplifier or receiver with sufficient power rating. Note Avoid driving the speaker system continuously with a wattage exceeding the maximum input power of each speaker. • Do not attempt to open the enclosure or remove speaker units. There are no user-serviceable parts inside. • Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system. • Periodically wipe the cabinet with a soft cloth. Do not use any type of scouring powder, abrasive pad or solvent. • Be sure to install the grill net in the correct direction. Speaker Placement Please note that room acoustics can often produce large difference in the sound for small changes in speaker placement. • Set up your speak...