Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Wireless LAN: approx. 2 m (6- 1/2 ft) Cordless phone and other electronic devices: approx. 2 m (6- 1/2 ft) Wireless system To avoid interference, maintain the following distances between the wireless system and other electronic devices that use the same radio frequency (2.4 GHz band). e. g. . Digital transmitter Refer also to the operating instructions for your home theater unit. Do not insert or remove while the home theater unit is on. SH-FX67 digital transmitter Insert fully until you hear a click. TRANSMITTER DIGITAL e. g. Rear of the home theater unit 6 Connections . Wireless system Preparation If the surround speaker cables (with a blue connector and a grey connector) have already been connected, disconnect the surround speaker cables from your home theater unit. (Continued on next page) . AC cord I SPEAKERS ENCEINTES LS / RB LB / RS SURROUND (3 – 6 ) AMBIOPHONIQUES SURR L SIDE R SIDE I/D SET SURR L SIDE R SIDE SURR L SIDE R SIDE Surround selector Connecting the speakers to the wireless system Connect to terminals of the same color. Insert fully. Speaker cable For 5.1ch connection [Compatible model: e. g. SC-PT660, SC-PT754] SURROUND (LS) : Blue SURROUND (RS) : Grey For 7.1ch connection [Compatible model: e. g. SC-BT100] SURROUND (LS) : Blue SURROUND BACK (LB) : Grey SURROUND (RS) : Grey SURROUND BACK (RB) : Blue Selector setting for the left and right speakers Selector setting for the left speakers Selector setting for the right speakers Impedance: 3 . to 6 . Speaker power rating: 100 W (Min) AC INAC power supply cord (included) To household AC outlet (AC 120 V, 60 Hz) RQTX0125 Setup 7 Setup Setup Making the wireless link RQTX0125 Setup Refer also to the operating instructions for your home theater unit. Turn on the wireless system. 1 Unit on/ off button [POWER CI, BI] Use this button to turn the unit on and off. CI: The unit is on. BI: The unit is off. AUTO OPERATION ON/OFF POWER . Pairing with existing SH- FX85 (not included) Your wireless system can be used with SH-FX85, both operating on the same wireless system as SH-FX85. By pairing, you can enjoy the benefits of both systems working together simultaneously. Preparation . Use the SH-FX85T transmitter card for pairing. Store your SH-FX67T transmitter card in a cool dry place for later use. . Make sure that the speaker and AC cord connections are completed, and the surround selector is set to the “SURR” position ( . page 7) . . Turn on the home theater unit and SH-FX85, and then reduce the volume. 1 Turn on SE-FX67. 2 While pressing the skip and slow-search button (e.g. [ 9/ 5]) on the home theater unit, press the numbered button [ 3] on the remote control until “ P” lights in the home theater unit’s display. . The indicator on SE-FX67 turns green. 3 While “P” is displayed, press [I/D SET] ....... on the rear of SE-FX67. . If “P” goes off before you press Use a pointed object. [I/ D SET], repeat step 2 and then continue the procedure. 4 While pressing [ 9/ 5] on the home theater unit, press the numbered button [ 3] on the remote control. . “ [W1] ” or the wireless link indicator lights on the home theater unit. 5 Turn off and on SE-FX67. . Make sure the indicator on SE-FX67 lights up green. AUTO OPERATION ON/OFF indicator The indicator lights red when the unit is turned on and lights green when the wireless link is activated. When the wireless link is inactive for a long time, it turns red. Turn on your home theater unit and check the wireless 2 link indicator on the home theater unit. e. g. Display on the home theater unit “ [W1] ” or an indicator should light up. . If “ [W1] ” or an indicator is flashing, refer to Troubleshooting guide ( . page 10) . Start play on the home theater unit. 3 W1 Conserving power The wireless system consumes a small amount of power, even when it is off (approx. 0.2 W) . To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. [Note[ Repeat the above steps if you should use SH- FX67T transmitter card (the link with SH-FX85 will be disconnected). 8 Using the surround back speakers [Compatible model: e. g. SC-BT100] To activate the additional SH- FX67 for 7.1ch-setup, it is necessary to be paired to work with the other SH-FX67. Additional wireless system Use only the SH-FX67T transmitter card. Wireless system is originally paired to work with the SH- FX67T transmitter card that comes along with it. For any other accessories to work with the SH-FX67T transmitter card in use, pairing is necessary. Pairing is necessary. Wireless system Home theater unit e. g. After pairing . Keep the transmitter cards of the additional wireless system for later use. Preparation . Make sure to connect the AC power supply cord of the additional wireless system. . Turn on the home theater unit and reduce the volume. 1 Turn on the additional wireless system. 2 While pressing the skip and slow-search button (e.g. [ 9/ 5] ) on the home theater unit, press the numbered button [3] on the remote contro...