Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 AtlasSound.com © 2002 Atlas Sound Printed in U.S.A. 000202 SL1-1193 2.9 Care should be taken to ensure that the chosen fixing point is strong enough to support the SM82. Care should also be taken to ensure that the SM82 is not exposed to direct precipitation. A 5.8"-27 threaded hole is provided on the C-bracket to allow the SM82 series speaker to be mounted on any Atlas Sound microphone stand for near-field live sound applications. Four brass inserts are also provided on the bottom of the SM82 to accommodate OMNIMOUNT™ 75 series brackets. All inserts for mounting knobs are standard 1.4"-20 to allow easy substitution of off-the-shelf vandal proof torx head or "one-way" hardware. Input connectors include a sealed 1.4" phone jack and touch-proof 5-way binding posts capable of accepting up to #12AWG cable. 1.4" jack and binding posts are paralleled to allow "daisy chain" connections between the two connector types. A tongue-in-groove cover with rubber wire exit grommet is provided to insure input connections are protected. Systems are available in black or white and can be painted to accommodate any architectural considerations. ARCHITECT AND ENGINEER SPECIFICATIONS The indoor/outdoor mini-loudspeaker system shall be Atlas Sound Model __________ (SM82-B or SM82-W) or approved equal. Assemblies shall consist of 2-way woofer, and tweeter, within environment-resistant housings. Enclosure shall be constructed of paintable UV-resistant, talc impregnated, polypropylene, injection molded plastic finished in black (SM82-B) or white (SM82-W). Each unit shall include a stamped, powder coated aluminum grille and removable C-shaped mounting bracket. All hardware inserts shall be brass and threaded 1.4"-20. The 150 Watt RMS system shall have a 8" (133mm) HYCONE™ treated woofer and a 1" exit compression driver frequency device. The dividing network crossover frequency shall be 2.5 kHz. The dividing network shall include protection circuits for the high-frequency component. The loudspeaker system shall meet the following performance criteria: Power handling, 150 Watts RMS; Frequency response, ±3dB from 65 Hz to 20 kHz; Pressure sensitivity, 92dB SPL at one watt, 100 Hz to 10 kHz measured at a distance of one meter on axis. Impedance shall be 8 ohms nominal. Input connectors shall include (1) sealed 1.4" phone jack and (1) 5-way touch-proof binding post. A tongue-in-groove cover with rubber wire exit grommet shall be provided to protect the input connectors. The loudspeaker system shall exhibit no performance or cosmetic degradation after a 100 hour salt spray test per ASTM B117. The unit shall be 161.2" high x 91.16" wide x 87.16" deep. SM82 Frequency Response (Transformer Bypassed) FREQUENCY (Hz) SPL in dB SM82 Harmonic DIstortion FREQUENCY (Hz) SPL in dB FUNDAMENTAL 3RD HARMONIC 2ND HARMONIC Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 AtlasSound.com © 2002 Atlas Sound Printed in U.S.A. 000202 SL1-1193 SM82 Horizontal Beamwidth vs. Frequency SM82 Vertical Beamwidth vs. Frequency One SM82 Horizontal Polar SM82 Vertical Polar FREQUENCY (Hz) Beamwidth (degrees) FREQUENCY (Hz) Beamwidth (degrees) Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 AtlasSound.com © 2002 Atlas Sound Printed in U.S.A. 000202 SL1-1193 2.11 ...
Эта инструкция также подходит к моделям:Акустика - Strategy Series SM82-B (114.82 kb)