Оценок - 4, средний балл: 3.5 ( )

Производитель: Atlas Sound Размер: 995.35 kb Название файла: Язык инструкции:

When “Play” is pressed, the first track will begin to Play. When Play is pressed again, the mode goes to Pause. When pressed a third time the mode returns to Play. 3 4 1 9 8 NO dISC 2 5 6 7 10 When STOP is pressed from Play or Pause the program is advanced to the end of the last track on the CD. When FWD is pressed from the Stop mode, the program will advance to the first track. When pressed from Play or Pause mode, the program will advance one track. Continuing to press FWD will advance one track each time. 8 CD PLAYER Continued 6 SKIP/REVERSE When REV is pressed from the Stop mode, the program will go back one track and begin playing the last track on the CD. When pressed from Play or Pause mode, the program will go back to the beginning of the track which was already playing. Continuing to press REV will step back one track at a time. 7 REPEAT/ENTER Pressing Repeat once will continuously replay the selected track. Pressing it twice will replay all tracks continuously. Pressing Repeat a third time will clear the settings. 8 SHUFFLE Pressing Shuffle from Stop, Play or Pause will result in random selection of tracks and begin playing continuously. Pressing Shuffle again will clear the program. 9 PROGRAM In Stop mode, press Program and observe “P 1: ” on the LCD. Press FWD and see “1:01”, press FWD again and see “1 :02”. Press enter and “2” will appear in the upper right of the LCD. Press FWD three more times and see “1:05”. Press Enter and see “5” added to the LCD. Press play and the second track will play, then advance to track 5. After playing all the selected tracks the program advances to the end of the CD. Pressing Play will repeat the program. To clear the program in the Stop mode, just press Program. Individual selections can be cleared while they are playing by pressing Program. This will not affect other selected tracks. 10 EJECT Pressing Eject from any mode will advance the program to the last track on the CD and eject the CD. “NO dISC” will appear on the LCD. NOTE: The CD player is capable of playing CD, CD-R and CD-RW discs, however due to the condition of the disc or the original it was copied from some discs may not play. 9 Powered Companion Speaker PA916-PS The Powered Companion PA has the same amplifier, power supply and speaker compliment as the full featured PowerPro PA916. It does not have the mixer panel because it can be controlled by the PowerPro PA916. With the integral 16-channel selectable wireless UHF receiver, it can function as a stand alone PA speaker when using a Q-316 Handheld microphone or the M-316 Beltpack transmitter with a LM-316, CM-316 or HBM-316 microphone. Although there are 5 LEDs on the front of the PA916-PS only 3 lights function on this unit because there is only one receiver. The red LED indicates RF, the amber LED is for audio, and the green LED indicates power On. Full Wireless Operation As the transmitter on the PA-16 is preset on channel 13, the receiver of the PA916-PS is also set on 13. Any audio from the PA916 can be transmitted to the PA916-PS without wiring. There is no limit on the number of PA916-SP speakers that can be used with the PA-916 within a range of 300 feet. Audio Line Buss When linking one or two PA916-PSs to the PowerPro PA916 via audio line, the PSC-50 XLR cable is connected to Audio Line Out XLR connector on the PA916. The other end is connected to Line In XLR on the Powered Companion Speaker. The Master Volume Control on the Audio Line panel of the master will adjust the PowerPro PA916 as well as all the Powered or Passive Companion Speakers, however the loudness needs to be adjusted via the Master Volume Control on the PA916-PS as well. Note: The mute switch on the PA916 will silence all speakers connected to it by ca...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: