Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
1. MONO/STEREO Button: When pressed, alternately selects stereo or mono mode operation for AV100; the STEREO LED indicator lights green on the front of the unit. 2. POWER Button: This button turns AV100 power on and off. 1 2 10 3. MUTE Button: When pressed, this button mutes the audio output from the AV100. 3 4. Play/Pause Button ( ) : When pressed in iPod mode, 9 alternately plays or pauses playback of audio/video data. 4 5. MENU Button: When pressed in iPod mode, jumps to next higher selection menu. 8 5 6. Up/Down ( / ) Buttons: When pressed, these buttons provide up/down navigation through the current iPod menu. 6 7. Skip to Previous/Next Track ( / ): When pressed in iPod mode, initiates skip to the previous or next audio/video 7 track. 8. ENTER Button: When pressed in iPod mode, provides selection of highlighted item in the current menu. 9. VOL +/-Buttons: When pressed, these buttons increase or decrease the audio output level from the AV100. 10. MODE Button: When pressed, provides sequential selection of AV100 mode of operation from AM through AUX 2. AV100 AV100 7 Functions of Controls, Indicators and Connectors AV100 Radio System, Rear View AV100 Radio System, Top View AV100 Radio System, Front View 20 21 24 23 22 25 9 10 11 15 14 13 12 16 17 18 19 1 2 7 6 5 4 3 8 Functions of Controls, Indicators and Connectors (Cont) 1. POWER ON/OFF Rocker Switch: When pressed to the ON ( I ) position, AC input power is applied to the radio system, placing it in the standby mode. 2. AC IN Power Connector: 2-prong male power connector for power cable connection to 120V, 60Hz power. 3. SUB OUT Audio Connector: Female RCA audio output connector to external subwoofer speaker. 4. L / R AUX 2 INPUT Connectors: Female RCA audio input connectors for connection to external audio equipment such as a CD player or other audio output source. 5. S-VIDEO Connector: Provides video output signal from a video iPod* to an external TV or monitor. 6. AM ANTENNA / 300 OHM Terminals: Provide connection for the AM loop antenna for AM signal reception. 7. FM ANTENNA / 75 OHM Connector: Provides connection for the FM antenna F connector for FM signal reception. 8. Protective Cover: Covers the iPod connector bay when iPod is not in use. 9. VOLUME Control: Continuous rotary control wheel for increasing and decreasing the volume of the audio output level; clockwise (CW) rotation increases volume, counterclockwise (CCW) rotation decreases volume. 10. POWER ( ) Pushbutton : Momentarily pressing this button applies power to the radio system, switching from the standby to on mode and vice-versa. 11. AUX 2 Indicator: This LED indicator lights blue when the AUX 2 mode is selected using the MODE switch. 12. AUX 1 Indicator: This LED indicator lights blue when the AUX 1 mode is selected using the MODE switch. 13. iPod Indicator: This LED indicator lights blue when the iPod mode is selected using the MODE switch. 14. FM Indicator: This LED indicator lights blue when the FM mode is selected using the MODE switch. 15. Ventilation Port: Provides cooling air for the audio power output vacuum tubes. 16. AM Indicator: This LED indicator lights blue when the AM mode is selected using the MODE switch. 17. MODE Pushbutton: Each time this button is pressed, the radio system operating mode switches in sequence from AM through AUX 2 and back again. 18. iPod Connector Bay: Provides male multi-pin connection to an installed iPod; connection compatibility is achieved with the supplied iPod adapter or with the adapter included with the iPod. 19. TUNE Indicator: Intensity of this amber LED is proportional to station tuning accuracy; the brighter the LED, the more optimum the reception. 20. Tuning Dial: This vernier control provides selective tuning of the AM and FM stations; the upper dial indicates the FM frequency range from 87.5MHz to 108MHz, while the bottom dial indicates the AM frequency range from 530kHz to 1710kHz. 21. Audio Power Tube Windows: These windows provide a means of observing the left and right channel power output vacuum tubes. 22. Audio Headphone ( ) Jack: Provides a 3.5mm connection for audio headphones. 23. Infrared (IR) Window: IR receiver for commands from the remote control. 24. AUX 1 Input Jack: Provides a 3.5mm stereo input connection for an MP3 player or similar device. 25. STEREO Indicator: This green LED illuminates when the FM station is broadcasting in stereo mode. *Refer to iPod compatibility list on page 9. AV100 AV100 Operation Preoperational Considerations Prior to operation, perform the following steps: 1. Remove the protective film from the battery compartment of the remote control. 2. Connect the power and antenna cables to the AV100 as outlined previously. 3. Apply line power to the AV100 by pressing the line power rocker switch on the rear of the unit to the on (I) position; the mode LEDs flash on for 2 seconds and then go out. The AV100 is now in the standby mode. 4. Press the POWER button on the top of the unit or on the remot...
Эта инструкция также подходит к моделям:Акустика - AV100 B (211.47 kb)