Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Obtaining Warranty Service: To obtain warranty service, a customer must deliver the product, prepaid, to EVI Audio Service or any of its authorized service representatives together with proof of purchase of the product in the form of a bill of sale or receipted invoice. A list of authorized service representatives is available from EVI Audio Service at 10500 W. Reno Avenue, Oklahoma, OK 73127 (800/845-8727 or FAX 405/577-3274). Incidental and Consequential Damages Excluded: Product repair or replacement and return to the customer are the only remedies provided to the customer. Altec Lansing shall not be liable for any incidental or consequential damages including, without limitation, injury to persons or property or loss of use. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. Other Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Altec Lansing Speakers and Speaker Systems are guaranteed against malfunction due to defects in materials or workmanship for a period of five (5) years from the date of original purchase. The Limited Warranty does not apply to burned voice coils or malfunctions such as cone and/or coil damage resulting from improperly designed enclosures. Altec Lansing active electronics associated with the speaker systems are guaranteed for three (3) years from the date of original purchase. Additional details are included in the Uniform Limited Warranty statement. Altec Lansing Accessories are guaranteed against malfunction due to defects in materials or workmanship for a period of one (1) year from the date of original purchase. Additional details are included in the Uniform Limited Warranty statement. For technical assistance, contact Technical Support at 800/234-6831 or 616/695-6831, M-F, 8:00 a.m. to 5:00 p.m. Eastern Standard time. Specifications subject to change without notice. * Long enclosure axis horizontal. 1 kHz Horizontal* — — — Vertical* 6 dB per division 200 Hz Figure 1—DTS200PI Polar Response (one-third-octave bands of pink noise) Altec Lansing DTS200PI Duplex" Weather-Resistant Loudspeaker Systems Figure 1—DTS200PI Polar Response (one-third-octave bands of pink noise) Horizontal* Long enclosure axis horizontal. ---Vertical* Figure 2—DTS200PI Frequency Response (on axis, 1 watt/1 meter, anechoic environment) FREQUENCY IN HERTZ Altec Lansing DTS200PI Duplex" Weather-Resistant Loudspeaker Systems FREQUENCY IN HERTZ ' 3rd Harmonic < 2nd Harmonic Figure 5—DTS200PI Harmonic Distortion (10% rated input power (20 W)) Figure 3—DTS200PI Impedance Curve UJ a z a UJ a S Figure 4—DTS200PI Harmonic Distortion (1% rated input power (2 W)) FREQUENCY IN HERTZ (/> ISJ 8 ■a 5< o c ■O FREQUENCY IN HERTZ Figure 6—DTS200PI Beamwidth Horizontal* — — Vertical* Long enclosure axis horizontal. Altec Lansing DTS200PI Duplex" Weather-Resistant Loudspeaker Systems Figure 7—DTS200PI Re (Q) and Directivity Index, Di 420 mm ' (16.9 in.) ' S’ RECOMMENDED U0UNT1NC ANCLE (VERTICAL) Figure 8—DTS200PI Dimensions and Mounting (grille removed for clarity)6 y RECOMMENDED MOUNTING ANGLE (HORIZONTAL) 288 mm (9.0 in.) Figure 9—DTS200PI and DTS200PIX Cable Configurations using Neutrik Speakon® NL4FC Four-Pin Connector’ BANANA PLUG A L GROUND INDICATOR DTS200PI CONNECTION INPUT TO SPEAKER SYSTEM r- I? Í N INPUT TO SPEAKER SYSTEM INPUT TO SPEAKER SYSTEM I L 70.7 VOLT 100 VOLT PIN 2(+! 50W I00W PIN 2(-) 70W MOW P!N |( + ) 100W 200W P1N '{'I COMMON COMMON rf A ? t N Li? CONNECTIONS TO TRANSFORMER TAPS DTS200PIX CONNECTION Altec Lansing DTS200PI/DTS200PIX Duplex® Weather-Resistant Loudspeakers System: Altec Lansing DTS200PI/DTS200PIX Duplex® Weather-Resistant Loudspeaker Systems Altec Lansing DTS200PI Duplex" Weather-Resistant Loudspeaker Systems Specifications System Type: Weather-resistant, vented-bass, full-range loudspeaker system Pressure Sensitivity, (70-20,000 Hz): 100-dB SPL1 Frequency Response (see Figure 2): 80-20,000 Hz2 Beamwidth (see Figure 6), Horizontal, 800-16,000 Hz: 90° (+25°, -40°) Vertical, 800-16,000 Hz: 90° (+15°,-35°) Directivity Factor (see Figure 7), Re(Q), 800-16,000 Hz: 9.2 (+10.5, -4.7) Directivity Index (see Figure 7), D,, 800-16,000 Hz: 9.6 dB (+2.5, -3.5 dB) Power Handling, Long Term: 200 watts3 Maximum Long-Term Output (200 watts input): 123-dB SPL4 Impedance (at 15 kHz) (see Figure 3): 6.7 ohms minimum 8.0 ohms nominal Components: 305-mm (12.0-in.) high-efficiency, Duplex® loudspeaker Input Terminals: Parallel 4-pin Neutrik Speakon® connectors Replacement LF: 89917 XX Replacement HF: 81514 XX Replacement Grille: 83892 Enclosure: Vented type, injection molded in black, high-impact polypropolene lined with polyester fill; includes 8-mm mounting points for MblOO, Mb200 and Mb300 suspension kits Dimensions (see Figure 8): ...