Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Please take a few moments to re a d this manual before you get started. Also, be sure to retain this document should you need to refer to it in the future . The AudioSource System 300 Home Theater Speaker System is designed to accurately reproduce high fidelity music, including digital signals. Movies and stereo TV broadcasts will sound more realistic, putting you in the center of the action. The LS 300/C center channel speaker is video-shielded, allowing placement on top of your television. LS 300 speakers are provided for both the front and surround channels, to provide a theater-like experience. This manual is divided into two sections. The first provides information about the LS 300 speakers and the LS 300/C center speaker. The next section concerns the SW 300 Powered Subwoofer. LS 300 & LS 300/C Hooking Them Up The five-way binding posts accommodate nearly any type of connector and up to 14-gauge wire. For bare wire, press the binding post in to reveal the eye, thread the wire into the eye, and release the spring-loaded connector. For banana plugs, simply insert the plug into the end of the connector. When connecting the speakers, be sure to retain the correct polarity. Attach the wire from the +, red, or positive terminal on one component to the +, red, or positive terminal on the corresponding component's speaker output terminals. The –, blackblack or negative terminals must connect to the respective –, black or negative terminals. This is easy to do by observing the color, stripe, or ribbing that appears on the wire. Please note: If any parts of this system are missing or damaged, do not return to the store where you purchased this system. Please call AudioSource directly at 800-HELP-115 (800-435-7115). Speaker Placement The center channel speaker should be placed as close as possible to the TV, preferably either directly on top of or below it. This locks the sound to the picture. Place the front speakers near the front corners of the room, either on a bookshelf or wall-mounted. Positioning near a c o rner enhances bass perf o rmance. Place the surround speakers either to the side of, or behind, your listening position. Typical placement is on the side walls, slightly above ear level, about two-thirds of the way back from the front of the room. This allows the surround speakers to aim directly at the listener, placing you in the middle of a five-speaker sound field. Speaker Mounting The LS 300 speakers include U-shaped brackets to mount the speakers to the wall. For safety, always mount these speakers on a wall that is reinforced from behind. Never mount a speaker on a wall made of unreinforced drywall or plasterboard. If you are unsure, consult a professional contractor. These speakers can also be placed on bookshelves and most types of speaker stands. Set-Up Diagram 1. Connect the left front speaker terminals (+ & -) of your receiver to the left LS 300 front speaker. 2. Connect the right front speaker terminals (+ & -) of your receiver to the right LS 300 front speaker. 3. Connect the left surround speaker terminals (+ & -) of your receiver to the left LS 300 rear surround speaker. 4. Connect the right surround speaker term i n a l s (+ & -) of your receiver to the right LS 300 rear surround speaker. 5. Connect the center channel speaker terminals (+ & -) of your receiver to the LS 300/C center channel speaker. Note: If you are using an outboard Dolby© Surround Processor, the speaker terminals for the center and rear/surround speakers will be found on this component, not on your receiver. SW 300 Powered Subwoofer About Subwoofers Subwoofers are designed to extend the bass response of your system beyond the limitations of most speakers. They are used in conjunction with, not in place of, your existing left and right speakers. A subwoofer can dramatically enhance a stereo TV, a stereo system, or a full fledged home theater. Features of the SW 300 The AudioSource SW 300 features a highly efficient ported enclosure, a rugged 6.5-inch reinforced driver and a fifty-watt amplifier with a passive low frequency crossover network. Line level inputs and speaker inputs and outputs are provided for fast and easy connection to virtually any system. Using the Controls Power The power switch has two positions: off and on. When the power LED is lit, the power is on. Level The level control adjusts the volume of the SW 300. Once set, the level control should not re q u i re further adjustment. Begin with the level control at the minimum position. Slowly incre a s e the level until you can hear the s u b w o o f e r. A subwoofer playing too loud can give your system a muddy sound, so be sure to balance the subwoofer care f u l l y with your other speakers. ...
Эта инструкция также подходит к моделям:Акустика - LS300 (131.81 kb)