Оценок - 4, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
Questions? For latest instructions, visit This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. quick start Attach AC adaptor cable to DC jack on back of the iD85 and plug the other end into a wall socket. 1 3: docking your iPad/iPhone/iPod Gently dock your iPad, iPhone or iPod into the 30 pin dock. If using an iPad with a cover or “skin”, first remove the rubber dock pad on the iD85. The iPad, iPhone or iPod will charge while docked. Press the Button on the iD85 to play your iPad, iPhone or iPod. remove the rubber dock pad iPad with cover 1: power Snap MW antenna into provided stand, then plug antenna cable into socket on back of iD85. Move antenna 12” away. Extend FM antenna. 2: antennas DC 7.5V DST time set time zone am antenna line-in -1 +1 time sync set +/- dtime wakeup eq snooze/dimmer DC 7.5V DST time set time zone am antenna line-in -1 +1 time sync set +/- wakeup eq snooze/dimmer Push plug head in to change plugs Push button to release plug head 4: time sync Press the Mode Button as needed to select MW/FM band. Press the + or - Button to tune in a station. See page 7 for programming presets. set +/- wakeup mode presets eq nap snooze/dimmer 5: radio volume set +/- bedtime wakeup mode presets eq nap snooze/dimmer 3 Controls and Indicators iD85 Display MW Loop Antenna socket AC Adaptor Jack ST switch Time Zone Button Time Set Button Time Sync Button Line-in Jack FM Antenna Snooze/Dimmer Button Alarm 1 Button Volume + Button Volume - Button Bedtime Button Play/Pause Button Rubberized device rest Set + Button Set - Button Wakeup Button EQ Button Presets Button Mode Button Alarm 2 Button Rear Panel Top Panel Nap Button Alarm Reset/Power/App Settings Button Flexible 30 pin connector for iPad/iPhone/iPod DC 7.5V 3.5A ST time set time zone am antenna line-in -1 +1 time sync Alarm 1 Indicator iHome App Indicator Alarm 2 Indicator Battery Low Indicator Time Display PM Indicator AM Indicator NOTE: AM/PM indicators will not appear when clock is set to 24 hour display mode Radio / Alarm Time / iPod Display Setting Up the iD85 Setting Up the iD85 Updating your iD85 firmware For best performance, make sure to update the iD85 firmware. To do so, download the free iHome+Sleep app from the App Store. Launch the app, then go to Settings/iD85 and follow directions to update the firmware. Connect iD85 to Power Source Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120V AC wall socket. Adaptor must be plugged in to operate unit. The iD85 does not operate on batteries (a battery back up system maintains clock settings during power failures). Setting the Time Zone (US only) This unit is a preset clock: the clock is preset at the factory. It’s simple to match the Time Zone setting to your location (US only). 1. Depending on your location and whether or not Summer Time (ST) is in effect, manually set the ST Switch located at the back of the unit to +1 to add an hour or to -1 to subtract an hour. 2. Press and hold the Time Zone Button located on the back of the unit until the Time Zone flashes on the lower part of the display. Press the + or - Button to select your time zone. Note: Time Zone is disabled when clock display format is set to 24 hours. 3. Press the Time Zone Button again (or no button within 10 seconds) to exit the time zone setting mode. 4. If the displayed time is not correct, please see Setting Time and Calendar Manually below. Setting Time Using iPhone/iPod Time Sync The iD85 Time Sync feature allows you to sync the time setting on the iD85 to the time from your iPhone, iPad or recent model iPod (iPod touch, iPod nano and iPod Classic; older iPod models such as iPod mini do not support this feature). 1. Press the Time Sync Button located at the back of the unit, “Time Sync” flashes on the lower part of the display. 2. Once sync is completed,“Time Updated” will appear on the display. 3. If sync was not successful, “Sync Failed” will appear on the display. If this happens, please try again, with a different iPhone/iPod if needed. If sync sti...