Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Not doing so could result in potential damage to the system. Connecting the Speakers On the rear of your athena TECHNOLOGIES® speakers are red and black binding posts. Using standard speaker wire, connect the system one channel at a time, and start your process at the Receiver. Connect the speaker wire from the positive (RED +) terminal on the receiver to the positive (RED+) terminal on the speaker. Connect the negative (BLACK-) terminal on the receiver to the negative (BLACK-) terminal on the speaker. Do this one channel at a time until all of your speakers are connected properly. Be careful to correctly match positive and negative, as well as the correct speaker to the correct channel. See Diagrams 1-4. NOTE: If you inadvertently reverse one of the connections (i.e, red to black), you will notice a severe lack of bass from your system. This is called wiring the system "Out of Phase". If this occurs, check the wiring and re-connect as necessary. A Note about Speaker wire Contrary to popular belief, not all speaker wire is the same. The speaker wire is the only contact the speaker has with the amplifier. If thin, low quality cable, such as "lamp cord" is used, then the overall sound quality will suffer, particularly in lengths of 10 feet or more. We strongly recommend the use of high quality speaker cable to obtain the best performance from your speakers. • WARRANTY OUTSIDE OF THE UNITED STATES AND CANADA Outside of North America the warranty may be changed to comply with local regulations. Ask your local athena TECHNOLOGIES® retailer for details of the limited warranty applicable in your country. Warranty for United States and Canada (SEE BACK COVER) athena TECHNOLOGIES®, SCTTM, and Create Your SoundTM, are trademarks of Audio Products International Corp. "Dolby", "Dolby Pro-Logic", and "Dolby Digital" are trademarks of Dolby Laboratories Licensing. "DTS" is a trademark of Digital Theater Systems Inc. Serie audition - manuel de l'utilisateur • AVANT-PROPOS Nous vous felicitons d'avoir choisi les enceintes acoustiques athena Technologies® ! La technologie exclusive a Athena Technologies® et la haute qualite de ses procedes de fabrication vous permettront de tirer plaisir, de longues annees durant, d'une restitution musicale aussi naturelle que precise. Les conseils donnes dans ce manuel vous aideront a obtenir et a maintenir un rendement optimal et, par consequent, une entiere satisfaction. Veuillez donc lire attentivement toutes les instructions pour vous assurer que vos enceintes sont installees de maniere appropriee et qu'elles fonctionnent correctement. • PERIODE DE RODAGE Nous vous recommandons fortement de resister a la tentation de faire fonctionner immediatement les enceintes athena Technologies® a leur pleine puissance. Essayez divers positionnements et faites de l'ecoute jusqu'a ce que les enceintes soient judicieusement placees et bien rodees. Le processus est tout simple : mettez votre lecteur de disques compacts en mode repetition et...
Эта инструкция также подходит к моделям:Акустика - AS-B2 (233.39 kb)
Акустика - AS-F2 (233.39 kb)
Акустика - AS-B1 (233.39 kb)
Акустика - AS-C1 (233.39 kb)