Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
9) Insert the speaker bezel into the hole, and using a Philips screwdriver, tighten the screws attached to the dog clamps until firm. DO NOT OVERTIGHTEN 10) Once the bezel is installed, install the speaker into the mounting bezel and using a Philips screwdriver, tighten the screws until firm. DO NOT OVERTIGHTEN PAINTING THE BEZEL AND GRILLE If you wish, you can paint the speaker bezel and grille to match the decor and design of your home. 1) For the in wall model, simply separate the bezel from the speaker baffle and paint the bezel, before you install the speaker portion. The grille is easily separated and can be painted on its own. 2) For the in ceiling models, use the wall template as a paint mask. Carefully cut the marked line on the template to create a template that fits inside the bezel, designed to help facilitate painting. Insert the paint mask, paint the bezel, and then remove the mask when the paint is dry. NOTE: If you paint the speaker grilles, ensure that the holes are still open allowing sound to come through. If any holes become filled with paint, find a small sharp tool and carefully remove the paint before completing the installation. FINE TUNING THE SPEAKERS To fine tune the speakers, you can adjust the angle of the tweeter slightly to direct the sound towards the seating positions. This option is offered in order to compensate for poor mounting locations. Caution: Be extremely careful when adjusting the tweeter as it is very easy to touch the tweeter, and cause permanent damage which is not covered under the manufacturers warranty. Do not touch the tweeter in any way. We sincerely hope you enjoy your new speakers for a lifetime! manuel MODELS AS-IW6 AS-IC6 AS-IC6ST AS-IC8 DESCRIPTION 6 1/2” 2-Way In-Wall Speaker 6 1/2” 2-Way In-Ceiling Speaker 6 1/2” 2-Way In-Ceiling Speaker with Dual Stereo Tweeters 8” 2-Way In-Ceiling Speaker WOOFER 6-1/2” Injection Molded Woofer with Rubber Surround 6-1/2” Injection Molded Woofer with Rubber Surround 6-1/2” Injection Molded Woofer with Rubber Surround 8” Injection Molded Woofer with Rubber Surround TWEETER 1” Teteron Dome 1” Teteron Dome Dual 3/4” Teteron Domes 1” Teteron Dome POWER HANDLING 100W 100W 100W 125W CROSSOVER POINT 2.2 kHz 2.2 kHz 2.4 kHz 2.2 kHz IMPEDANCE 8 8 8 8 FREQUENCY RESPONSE 55 Hz - 20 kHz 55 Hz - 20 kHz 55 Hz - 20 kHz 45 Hz - 20 kHz SENSITIVITY 89 dB 89 dB 89 dB 90 dB DIMENSIONS 12-1/8” x 8-11/16” x 31/ 2” (HxWxD) 9-1/8” x 3-1/4” 9-1/8” x 3-1/4” 10-3/4” x 3-5/8” CUTOUT DIMENSIONS 7-1/2” x 10-7/8” (WxH) 7-5/8” 7-5/8” 9-13/16” MOUNTING DEPTH 3-1/4” 2-3/4” 2-3/4” 3-1/4” WEIGHT 2.5lbs each 2.5lbs each 2.5lbs each 2.5lbs each SHIPPING WEIGHT 6lbs pair 6lbs pair 3.5lbs each 8lbs pair IMPORTANTES CONSIGNES DE SECURITE - LIRE ATTENTIVEMENT Lire les instructions : Il est fortement recommande de lire toutes les notice d'utilisation avant de faire fonctionner l'appareil. Conserver les instructions : Conserver les consignes de securite et la notice d'utilisation consultation ulteri...
Эта инструкция также подходит к моделям:Акустика - AS-IC6ST (498.92 kb)
Акустика - AS-IC8 (498.92 kb)
Акустика - AS-IW8 (498.92 kb)