Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
• BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerates. • MODE D’EMPLOI Veuillez lire avant d’utiliser cet appareil. • MANUAL DE OPERACION Lealo antes de utilizar este equipo. • ISTRUZIONI PER L’USO Si prega di leggere prima di utilizzare il attrezzatura. • ANVANDARHANDLEDNING Innan du anvander utrustningen bor du lasa igenom denna anvandarhandledning. • ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 Munchen, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U.K. LTD. Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K. Phone 0870-33 33 763 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781 ALPINE ELECTRONICS DE ESPANA, S.A. Portal de Gamarra 36, Pabellon, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588 ALPINE ELECTRONICS (BENELUX) GmbH Leuvensesteenweg 510-B6, 1930 Zaventem, Belgium Phone 02-725-13 15 YAMAGATA (Wuxi) Co., Ltd. Printed in China (Y) Block 28-25, Changjiang Nanlu, WND, jiangsu, China 68-08564Z99-A Accessories CD-ROM Interface Box USB Cable (5m) Connection Cable for Sound Characteristics Head Unit (2m) Measurement Microphone (3m) Installation Caution before Installing Install the IMPRINT SOUND MANAGER program before connecting the KTX-100EQ to your personal computer. If the program is installed when the KTX-100EQ connected to the PC, the program may malfunction. Operating System The Program is available only on the Microsoft® Windows® XP Service Pack-2 system. Make sure that this program is available by referring to “System Properties” on your PC. To use this program, Microsoft.NET Framework 1.1 (or later) is required. If this application is not installed on your PC, the application is automatically installed with the program. Installing 1 Insert the supplied CD-ROM into the CD-ROM drive, and activate the setup.exe in the IMPRINT folder. Follow the installation instructions on the screen. • Before installing, close all activated programs. 2 Activate the USB_setup.exe in the DRIVER folder, and then install according to the instructions on the screen. 3 After completing the installation, restart your PC. 1-EN Connections Before setting MultEQ, connect all other devices. 1 Install the CDA-9887/CDA-9887R into the vehicle. 2 After Installing the unit, make sure that sound is output from each speaker. 3 Press the OPEN button to open the front panel, then slide it in the left direction A, and pull out towards you B to remove. 4 Connect the Head Unit Connection Cable, USB Cable and Microphone to the Interface Box. 5 Connect the USB Cable to a USB port of your PC. 6 Connect the Head Unit Connection Cable to the connector of the CDA-9887/CDA-9887R with the front panel removed. CDA-9887/ CDA-9887R Head Unit Connection Cable Interface Box USB Cable Sound Characteristics Measurement Microphone • Be sure to connect the cable to the CDA-9887/CDA-9887R lastly. Failure to do so may result in communication error and measurement may not be possible. 7 Check all connections, start the MultEQ setting. 2-EN Before Setting MultEQ WARNING While driving, do not set up MultEQ. To prevent accidents, do not set up MultEQ while driving. The setting of the MultEQ function is required to mount the microphone in the vehicle in order to measure sound characteristics. Also, during measurement, loud measurement tone (signal) from the speakers may be output. Making such settings may distract you from driving and result in an accident. Read following provisions before setting MultEQ. • The MultEQ setting should be made in as quiet a place as possible after turning off the engine, air- conditioner and heater. If you have a car phone or cellular phone in the vehicle, remove them from the vehicle or turn its power off. If sound other than measurement tone to be measured (engine or receiving sound of car phone, etc.) occur, sound measurement in the vehicle may not be accurate. • When setting MultEQ, be sure to use the microphone supplied with this unit. If a microphone other than the supplied one is used, measurement may not be possible or sound measurement in the vehicle may not be accurate. • If a power amplifier or a powered subwoofer with an input level control is connected and this level is lowered, measurement may not be possible. However, the input level should set lowered than normal level to adequately perform measurement. • If a power amplifier with a low-pass filter is con...