Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
The sleep time will increase in 5 minutes increment every time the SLEEP Button is pressed. Stop pressing the ! Button when the desired sleep time is displayed. 4. The unit will automatically turn off after the preset sleep time has elapsed. However, if you want to turn the radio off before the preset sleep time has elapsed, press the Button once to switch the power off. The LCD Backlight will turn off and the SLEEP Indicator “SLEEP” will disappear in the 18 Display. Deactivating the SLEEP Timer If you want to exit the SLEEP mode simply press either the ALARM 1 or ALARM 2 button once. SLEEP AND WAKE TO ALARM, iPod OR RADIO 1. Refer “SETTING THE ALARMS” in above to set the desired wakeup time (s), wakeup mode, i.e. ALARM, iPod or RADIO and volume level. 2. Follow step 1-3 (shown above) under the “ADJUSTING THE SLEEP PERIOD” section to set the desired SLEEP time. The Radio is now programmed to turn off automatically at the Sleep Time you selected and then to turn on again at the preset “Alarm Time”. CARE AND MAINTENANCE 1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places. 2. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. 3. For better Clock Display clarity, avoid operating the unit under direct sunlight or in strong room illumination. 4. Unplug the unit from the electrical power outlet immediately in case of malfunction. Cleaning the Unit !• To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. !• The finish on the unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. !• If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet. !• If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit. CAUTION: Never allow any water or other liquids to get inside the unit while cleaning. 19 TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE If you experience difficulties in the use of this Docking System, please check the following or call 905-845-6200 for Customer Service. Symptom Possible Cause Solution The unit does not respond (no power) AC cord is not plugged properly into a wall outlet or the connector is not plugged into the AC IN jack on the back of the unit. Wall outlet is not functioning. Plug the AC cord into a wall outlet and plug the connector into the AC IN jack on the unit. Plug another device into the same out outlet to confirm the outlet is working. iPod/iPhone does not install properly. Using no/wrong iPod Adaptor. iPod/iPhone does not dock properly Make sure the dock insert is properly fit for your iPod/iPhone. Make sure the dock insert is properly fit for your iPod/iPhone Remove your iPod/iPhone from the dock and check for obstruction on the connectors in the dock and on your iPod/iPhone. Then reseat it in the dock. iPod/iPhone does not respond to the system iPod/iPhone is not installed properly. Your iPod/iPhone is locked up. Remove your iPod/iPhone from the dock and check for obstruction on the connectors in the dock and on your iPod/iPhone. Then reseat it on the dock. Please make sure that your iPod/iPhone is working properly before docking into the unit. Please refer to your iPod/iPhone manual for info on resetting the iPod/iPhone. iPod/iPhone does not charge up iPod/iPhone is not installed properly. iPod/iPhone is locked up/ frozen. iPod/iPhone battery has problem. Remove your iPod/iPhone from the dock and check for obstruction on the connectors in the dock and on your iPod/iPhone. Then reseat it in the dock. Please make sure your iPod/iPhone is working properly before docking into the unit. Please refer to your iPod/iPhone manual for details on resetting. AM band is too noisy. The reception at the set location is poor Slightly rotate the AM loop antenna position for the best reception. Move the AM loop antenna away from the unit to avoid interference. FM band is too noisy. The reception at the set location is poor Make sure the FM Antenna is fullyextended and tape it onto the wall ifrequired, the higher the better SERVICE Please refer to the instructions on the enclosed warranty card for returning your unit for service. When returning the unit, please remove any batteries to prevent damage to the unit in transit and/or from possible battery leakage. We are not responsible for batteries returned with the product or for the cost of replacement. Distributed by: Target Marketing Corp. 47 Forsythe Street. 20 Oakville, ON. L6K3R7 Email: Please have model number ready, for Customer Service, call 905-845-6200 SPECIFICATIONS General Power FUNCTION: AC 120V~ 60Hz 20W Dimensions: 13.5 (L) x 6.6 (D) x 5.9 (H) Inch Weight: 4.9 lb Radio Frequency Cov...