Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Use this Product Safely . .. . .. .. .. ... .. .. . .. 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 2 Docking Station Functions . . . . . . . . . . . . . . . . . . 3 Inserting an IPAD into the Overhead Housing . . . 4-6 Removing an IPAD from the Overhead Housing . . 7 Adjusting the Overhead Housing . . . . . . . . . . . . . 8 Basic Operation and Function . . . . . . . . . . . . . . . 8-9 Headphone Operation. . . . . . . . . . . . . . . . . . . . . 9 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Features • Overhead in-vehicle docking station for use with • IPOD dock connector provides power to charge IPAD IPAD 1. (Insert included for IPAD 2). while in use. • Built-in continuous band FM transmitter for audio • Dome lights with selectable trigger input. transmission to vehicle’s radio. • Swivel hinge for optimum viewing angle adjustment. • Built-in IR repeater for audio transmission to IR headphones. Use this Product Safely Driving Be aware of road and traffic conditions. Always observe safe driving rules and follow all existing traffic regulations. Do not operate this system if doing so will divert your attention in any way from the safe operation of your vehicle. Keep the volume at a low level. If you experience difficulty in operating the system, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments. Viewing of driver seat video source while driving is strictly prohibited. Moisture Do not expose the product to water or excessive moisture. This could cause electrical shorts, fire or other damage. Parking Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the vehicle interior a chance to cool down before using. Proper Power Supply This product is designed to operate with a 12 Volt DC, negative ground battery system. Repairs Contact our customer service representatives. Do not attempt to disassemble or adjust this product yourself. Installation The unit should be installed in a horizontal position. Cleaning Use a soft cloth with some purified water to clean the unit. Do not use any cleaner or chemical to clean the unit. Usually, a dry cloth will do. Warning Be careful when inserting the IPAD. Do not apply undue pressure to the IPAD. Safety Information CAUTION: FCC REGULATIONS STATE THAT ANY UNAUTHORIZED CHANGES OR MODIFICATIONS TO THIS EQUIPMENT MAY VOID THE USER’S AUTHORITY TO OPERATE IT. WARNING: • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. • THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. Docking Station Functions Docking Station Functions 3 4 5 2 1 7 6 9 10 8 1. FM Transmitter Adjustment Button: Push the (-) button to tune to a lower radio frequency, press the (+) button to tune to a higher radio frequency. 2. FM Transmitter LCD Display: Displays the audio transmission frequency. 3. Dome Light Button: Press to turn on or off the dome lights. 4. IPAD Docking Housing Release Button: To release the docking housing, push the button then gently pull down the housing. Adjust the housing to the desired viewing position. 5. Power Button: Press this button to turn the docking station on or off. 6. Dome Lights. 7. IR Repeater: The audio signal is converted to an infrared light and transmitted to the headphones. 8. IPAD Docking Housing Access Door: See the installation part of this manual for more information. 9. IPAD Eject Button: See the installation part of this manual for more information. 10. IPAD Sleep/Wake Button: Press this button to activate the IPAD’s sleep/wake button. Release Button 4 Inserting an IPAD or IPAD 2 into the Overhead Housing 2. Slide open the docking housing access door. 3. Next rotate the housing access door until it locks in the vertical position. Note 1: Make sure the IPOD dock connector is out of the way before inserting the IPAD. Note 2: • If you are using Original IPAD go to step 4. • If you are using IPAD 2 please see steps 3a-3c. 3a. Slide the IPAD 2 insert into the housing. Warning: The IPAD 2 insert should be inserted with the straight edge on the left and the cutouts on the right side (as shown in illustration). USB Power Plug 1. Press the release button on the docking housing. Gently pull down the housing. 3b. Support the right side of the housing with your hand and slide in insert from the left side. 5 5. Slide the IPAD into the housing. Warning: The IPAD’s HOME button must be on the left side when inserting the IPAD. Inserting the IPAD incorrectly will damage the docking station. Home Button 4. Adjust ...