Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
horizontal coverage 140° 100 W continuous program power capacity 44 mm (1.7 in) aluminium voice coil Polyimide diaphragm 1200 - 18000 Hz response 108.5 dB sensitivity Horns Specifications Horizontal Coverage 140° max Active Radiating Factor 92.5 % Recommended Crossover (1) 1.5 kHz Waveguide Material Cast Aluminium Nominal Impedance 8 ohm Minimum Impedance 7.7 ohm Nominal Power Handling (2) 50 W Continuous Power Handling (3) 100 W Sensitivity (1W/1 m) (4) 108.5 dB Frequency Range (5) 1.2-18 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Diaphragm Material Polyimide Flux Density 1.8 T Mounting and Shipping Info Waveguide Baffle Cutout 102x25 mm (4x1 in) Driver diameter 86 mm (3.3 in) Dimensions 111x87x155 mm (4.4x3.5x6.1 in) Net Weight 1.3 kg (2.9 lb) Shipping Weight 1.35 kg (3.0 lb) Shipping Box 120x95x180 mm (4.7x3.7x7.1 in) 12 dB/oct. or higher slope high-pass filter. 9 2 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. ^Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. ^Waveguide mounted on 90°x10° bell horn © Horizontal angle Vertical angle...