Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Install the front frame utilizing the return flange mounting holes located on the left and right side of the frame. After the frame is in place, level, plumb and install the door. Check for correct latch alignment. Front View (OBAD36 shown) Front View (OBAD20 shown) Rear View Rear View (OBAD36 shown) (OBAD20 shown) SPECIFICATIONS MEASUREMENTS Overall Width OBAD20 - 19 1/2" (495mm) OBAD36 - 35 7/8" (911mm) Overall Height 21" (533mm) Overall Depth 1/4" (6mm) deep return on frame edge Cutout Width OBAD20 - 16 3/4" (425mm) OBAD36 - 33 1/8" (841mm) Cutout Height 18 3/4" (476mm) Cutout Depth 3" (76mm) Minimum Dacor • 1440 Bridge Gate Drive, Diamond Bar, CA 91765 • Tel: (800) 793-0093 • FAX: (626) 403-3130 • Part No. 102547 Rev. A...
Эта инструкция также подходит к моделям:Грили - OBAD20 (435.18 kb)