Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Your new grill with drip tray allows you to prepare all kinds of tasty food almost smoke-free! Grilling with this appliance is extra safe thanks to the safety shield and easy to use because of the large grilling surface. General description (fig.1) A Thermostat unit with mains cord B Temperature control with on/off position and temperature light C Base D Drip tray E Removable grilling plate F Cool-touch handgrips G Safety shield H Thermostat unit socket Important Read these instructions for use carefully before using the appliance and save them for future reference. . Check if the voltage indicated on the bottom of the appliance corresponds to the local mains voltage before you connect the appliance. . If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. . Do not connect the thermostat unit to the mains before having inserted the thermostat unit into the appliance. . Make sure that the inside of the thermostat unit socket is completely dry before inserting the thermostat unit. . Only use the thermostat unit supplied with the appliance. . Only connect the appliance to an earthed wall socket. . Do not let the mains cord hang over the edge of the table or worktop on which the appliance is standing and keep the cord away from the hot surfaces of the appliance. . Put the appliance on a flat, stable surface with sufficient free space around it. . The drip tray must always be in place during cooking. . Always preheat the plate before putting any food on it. . The accessible surfaces may become hot when the appliance is in operation. . Keep the appliance out of the reach of children. . Do not let the appliance operate unattended. . Be careful of spattering fat when you are grilling fatty meat or sausages. . Always unplug the appliance after use. . Always switch the appliance off and remove the plug from the wall socket before removing the thermostat unit from the thermostat unit socket. . Always clean the appliance after use. . Let the appliance cool down completely before removing the plate, cleaning the appliance or putting it away. . Do not immerse the mains cord with thermostat unit in water or any other liquid. . Never touch the plate with sharp or abrasive items, as this will damage the non-stick coating. . Make sure you reassemble the plate properly after having removed it. . This appliance is only intended for indoor use and should not be used outdoors. ENGLISH Before first use 1 2 Remove any stickers and wipe the body of the appliance with a damp cloth. Clean the appliance and the plate thoroughly (see chapter 'Cleaning'). B The appliance may produce some smoke when you use it for the first time. This is normal. Using the appliance 1 Place the drip tray in the base (fig. 2). 2 Fill the drip tray with enough water to cover the bottom (fig. 3). -The water in the drip tray will take away smoke and nasty smells, as it prevents food particles from getting burnt. -To make cleaning easier, you can line the drip tray with aluminium foil before filling it with water. -When lining the drip tray, make sure the foil does not hang over the sides of the tray, as this will prevent proper air circulation. 3 Place the grilling plate in the base (fig. 4). The grilling plate only fits in the base in one way. 4 Place the safety shield on the appliance (fig. 5). The slots in the safety shield must fit securely on the pins of the grilling plate. The safety shield prevents grease from spattering onto the surrounding surface (e.g. a worktop). Lightly grease the grilling plate with butter or oil. Insert the thermostat unit into the thermostat unit socket in the side of the appliance (fig. 6). Turn the temperature control to the position appropriate for the ingredients to be grilled (see section 'Grilling times' in this chapter). 5 6 7 The temperature light goes on. 8 Place the ingredients on the grilling plate when the temperature light goes out. Be careful: the grilling plate is hot! B During the grilling process, the temperature light comes on and goes out from time to time as an indication that the heating element is switched on and off to maintain the correct temperature. 9 Turn the food from time to time by means of a wooden or plastic spatula or tongs. 10 Remove the food when it is done. Use a wooden or plastic spatula or tongs to remove the food from the appliance. Do not use metal, sharp or abrasive kitchen utensils. 11 For optimal results, remove excess oil from the plate with a piece of kitchen paper before grilling the next batch of food. 12 To continue grilling, place the next batch of food on the grilling plate when the temperature light goes out. Grilling times In the table at the end of these instructions for use you will find some types of food you can cook on this table grill. The table shows which temperature to select, how long the food should be grilled and which part of the grilling plate to use: the gril...