Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Do not store a spare LP gas tank under or near this appliance. Please use protective gloves when assembling this product. Do not force parts together as this can result in personal injury or damage to the product. Never cover entire cooking area with aluminum foil. Deaths, serious injury or damage to property may occur if the above is not followed exactly. page no. Exploded View Parts List 1 Warming Rack 55-07-235 2 Cooking Grid 55-07-215 3 Lid Handle Assebly 55-07-224 4 Hybrid Heat Plate 55-07-220 5 Temperature Gauge 55-07-233 6 Lid 55-07-234 7 Igniter Wire 55-15-060 8 Burner 55-07-214 9 Electrode 55-15-295 10 Top Hinge (2) 55-15-330 11 Side Handle (2) 55-07-232 12 Bottom Hinge (2) 55-15-329 13 Hybrid Heat Plate Support (2) 55-14-989 14 Bottom Bowl 55-07-213 15 Lock (2) 55-07-225 16 Igniter Assembly 55-07-731 17 Left Leg 55-07-223 18 Right Leg 55-07-230 19 Wind Guard 55-07-238 20 Regulator/Control Valve 55-14-986 1 2 3 4 5 7 6 8 11 9 10 12 13 14 15 17 16 11 18 20 19 Hardware A Screw M5x15 Nickel Plated Phillips Truss Head 4 pcs B Screw M6x12 Nickel Plated Phillips Truss Head 4 pcs C Wing Nut M5 Nickel Plated 6 pcs D Wing Nut M6 Nickel Plated 4 pcs E Wing Bolt M6x8 Nickel Plated 2 pcs F Washer o5.3 Nickel Plated 6 pcs G Washer o6.4 Nickel Plated 5 pcs H Washer o6xo18 Heat Resistant 6 pcs I Washer o6xo22 Heat Resistant 1 pcs J Lock Washer o5.3 Nickel Plated 6 pcs K Lock Washer o6.4 Nickel Plated 5 pcs L Pin o5 x 32 Zinc Plated 2 pcs M Cotter Pin o1.4 x 30 Steel 2 pcs Tools Required for Assembly (Not Included) #2 Phillips Head Screwdriver 2 Attach Left and Right Legs B x 4D x 4 G x 4 K x 4 1 DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. To complete assembly you will need: • (1) Leak Detection Solution (Instructions on how to make solution are included in “Operating Instructions” section) • (1) 14.1 oz or (1) 16.4 oz LP gas tank. Note: You must follow all steps to properly assemble grill. Typical assembly: approximately 30 minutes. 4 Attach Igniter Button Assembly Ex 1 Ix 1 3 Attach Side Handles, Heat Plate Support Ax 4Cx 4Fx 4 Hx 4Jx 4 Assembly Instructions 6 Attach Wind Guard Attach Regulator/Control Valve Note: Once attached, the regulator/control valve will freely rotate to accomodate for the LP gas tank. 5 Attach Burner and Igniter Wire Ex 1 Gx 1Kx 1 8 Attach Lid L x 2 Mx 2 7 Attach Lid Handle Assembly Cx 2Fx 2 Hx 2Jx 2 Assembly Instructions (continued) 10 Insert Hybrid Heat Plate Insert Cooking Grid 9 Insert Warming Rack 11 Lock Lid Unlock Lid 12 Fold Up Legs Note: Always lock lid before folding legs. Unfold Legs Note: Always open legs completely and are secured in place before lighting. Operating Instructions This grill is designed to operate with a one pound 7-3/8” high disposable / 16.4 oz. or 14.1 oz. propane gas tank (DOT 39 Cylinder). DO NOT ATTEMPT TO REFILL ANY ONE POUND (16.4 oz. or 14.1 oz.) PROPANE GAS TANKS! Connecting Gas Tank 1. Make sure the regulator/control valve is in the “LOCK OFF” position. (Figure 1a) 2. Lubricate the threads of the regulator valve with petroleum jelly, insert the gas tank into the regulator valve and hand-tighten firmly. (Figure 1b) 3. Test for leaks Checking for Leaks Burner Connection 1. Make sure the control valve is securely fastened to the burner. (Figure 2) If your unit was assembled for you, visually check the connection between the burner and control valve. WARNING: Failure to inspect this connection or follow these instructions could cause a fire or an explosion which can cause death, serious bodily injury, or damage to property. 2. If the burner pipe does not rest flush to the control valve, please contact 1.800.762.1142 for assistance. Regulator / 1# LP Gas Tank Connection 1. Make 2-3 oz. of leak solution by mixing one part liquid dishwashing soap with three parts water. 2. Make sure control knob is “OFF”. (Figure 3) 3. Spoon several drops of solution, or use squirt bottle, at the LP gas tank to regulator connection. (Figure 4) 4. Inspect the solution at the connection, looking for bubbles. If NO bubbles appear, the connections are secure. If bubbles appear, you have a leak. a. Loosen and retighten this connection, making sure the connection is secure. b. Retest with solution. If you continue to see bubbles after several attempts, disconnect propane source and contact 1.800.762.1142 for assistance. First Use 1. Make sure all labels, packaging and protective films have been removed from the grill. 2. Remove manufacturing oils before co...