Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. 7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 11. Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit or call 1-800-288-2792 Toll Free 8 Trouble Shooting Trouble Shooting Symptom Possible Problem Solution Unit doesn’t respond (no power) AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of the unit Plug the AC adaptor into a wall outlet and plug the connector into the power supply jack on the unit Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working iPod cannot dock properly Using no or wrong iPod insert Make sure the dock insert is the proper fit for your iPod iPod is not installed properly Remove your iPod from the connector and check for any obstruction on the connectors in the dock and on your iPod. Then reseat it in the dock. iPod does not respond to the unit iPod is not installed properly Remove your iPod from the connector and check for any obstruction on the connectors in the dock and on your iPod. Then reseat it in the dock. Your iPod software is too old Upgrade software on your iPod. For details, visit or iTunes iPod is locked up Please make sure your iPod is working properly before docking it to the unit. Please refer to your iPod manual for details on iPod operation. Using 1st or 2nd generation iPod or other device iH110 cannot control those iPods or other devices. iPod didn’t charge up iPod is not installed properly Remove your iPod from the connector and check for any obstruction on the connectors in the dock and on your iPod. Then reseat it in the dock. iPod is locked up/frozen Please make sure your iPod is working properly before docking it to the unit. Please refer to your iPod manual for details. iPod battery has problem Sound is distorted Volume level is set too high Decrease the volume. Turn off EXB bass effect Sound source is distorted If iPod original sound source is poor quality, distortion and noise are easily noticed with high-power speakers. Try a different audio source such as a music CD. If you are using an iPod Shuffle or external sound source like older generation iPod, try reducing the output volume on the device itself. Also, try reducing bass. 9 Solucion De Problemas Solucion De Problemas Sintoma Posible Problema Solucion La unidad no funciona (no circula corriente electrica) El adaptador de AC no esta conectado al tomacorriente o el conector no esta conectado a la ficha en la parte posterior de la unidad Conecte el adaptador de AC al tomacorriente y tambien conecte el conector a la ficha en la parte posterior de la unidad El tomacorriente no funciona Coloque otro aparato en ese mismo tomacorriente para confirmar si el que no funciona es el tomacorriente El iPod no encastra correctamente No ha colocado el encastre del iPod, o esta utilizando el encastre incorrecto. Verifique que el encastre sea el apropiado para su iPod El iPod no encastra correctamente Q...
Эта инструкция также подходит к моделям:Радиоприемники - iH110 (136.5 kb)