Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
If you still need assistance, call us at 1-800-688-9900. In Canada, visit our website at or call us at 1-800-807-6777. You will need your model and serial number, located on the inside wall of the ice maker compartment. Table of Contents / Indice / Table des matieres ICE MAKER SAFETY ...............................1 SEGURIDAD DE SECURITE DE LA LA FABRICA DE HIELO .........................14 MACHINE A GLACONS......................... 28 INSTALLATION INSTRUCTIONS............2 INSTRUCCIONES DE INSTALACION...15 INSTRUCTIONS D’INSTALLATION...... 29 ICE MAKER USE......................................7 USO DE LA FABRICA DE HIELO ..........21 UTILISATION DE ICE MAKER CARE...................................8 LA MACHINE A GLACONS................... 35 CUIDADO DE LA TROUBLESHOOTING............................11 FABRICA DE HIELO ...............................22 ENTRETIEN DE WARRANTY ............................................13 LA MACHINE A GLACONS................... 36 SOLUCION DE PROBLEMAS................25 DEPANNAGE.......................................... 39 GARANTIA...............................................27 GARANTIE.............................................. 41 ICE MAKER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: DANGER WARNING You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. W10206510A IMPORTANT SAFETY INSTRUCTIONS WARNING : To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic precautions: ¦ Plug into a grounded 3 prong outlet. ¦ Disconnect power before cleaning. ¦ Do not remove ground prong. ¦ Disconnect power before servicing. ¦ Do not use an adapter. ¦ Replace all parts and panels before operating. ¦ Do not use an extension cord. ¦ Use two or more people to move and install ice maker. SAVE THESE INSTRUCTIONS INSTALLATION INSTRUCTIONS Unpack the Ice Maker WARNING Excessive Weight Hazard Use two or more people to move and install ice maker. Failure to do so can result in back or other injury. Removing Packaging Materials Remove tape and glue from your ice maker before using. ¦ To remove any remaining tape or glue from the exterior of the ice maker, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. ¦ Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. Do not use chlorine bleach on the stainless steel surfaces of the ice maker. These products can damage the surface of your ice maker. Cleaning Before Use After you remove all of the packaging materials, clean the inside of your ice maker before using it. See the cleaning instructions in the “Ice Maker Care” section. Location Requirements ¦ To ensure proper ventilation for your ice maker, the front side must be completely unobstructed. The ice maker may be closed-in on the top and three sides, but the installation should allow the ice maker to be pulled forward for servicing if necessary. ¦ Installation of the ice maker requires a cold water supply inlet of ..." (6.35 mm) OD soft copper tubing with a shutoff valve and either a gravity-drain system or condensate pump to carry the water to an existing drain. ¦ Choose a well ventilated area with temperatures above 55°F (13°C) and below 110°F (43°C). Best results are obtained between 70°F (21°C) and 90°F (32°C). ¦ This unit must be installed in an area sheltered from the elements, such as wind, rain, water spray, or drip. ¦ When installing the ice maker under a counter, follow the recommended opening dimensions shown. Place electrical and plumbing fixtures in the recommended location as shown. NOTES: ¦ Be sure the power supply cord is not pinched between the ice maker and the cabinet. ¦ Be sure the water supply line is not pinched between the ice maker and the cabinet. ¦ Be sure the drain line (on some models) is not pinched between the ice maker and the cabinet. 11..." (29.2 cm) 15" (38.1 cm) 24" (60.1 cm) 9" (22.9 cm) 28..." (72.4 cm) 3..." (8.9 cm) A 34" (86.4 cm) Min. 34..." (87.6 cm) Max. B A. Recommended location for electrical and plumbing fixtures B. Floor level ¦ Choose a location where the floor is even. It is important for the ice maker to be level in order to work properly. If nee...