Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
When the E.PIANO button's indicator is dark, you are in Mode 1. When the E.PIANO button's indicator is blinking, you are in Mode 2. When the E.PIANO button's indicator is lit, you are in Mode 3. Г—-I FUNCTION 6 While hoidii * When power is turned on, the unit will always be at the Mode 1 setting. Mode 1 II III MIDI Messages TX RX TX RX TX RX Note Messages Yes Yes Yes Yes Yes Yes Program Change Messages Yes Yes Yes No Yes* Yes Control Change Messages Volume (7) No Yes No Yes No Yes Damper (64) Yes Yes Yes Yes Yes Yes Sostenuto (66) Yes Yes Yes Yes Yes Yes Soft (67) Yes Yes Yes Yes Yes Yes Chorus On/Off (93) No No No No Yes Yes Reverb On/Off (91) No No No No Yes Yes Master Tune (RPN) No No No No Yes Yes Roland System Exclusive Messages Multi-Timbral Mode No Yes No Yes Yes Yes Chorus Depth No Yes No Yes Yes Yes Reverb Depth No Yes No Yes Yes Yes Brilliance No Yes No Yes Yes Yes * In Mode 3, the appropriate Program Change message will be transmitted whenever you press a Voice button. (See the following page.) E.PIANO 1 “......1 Mode 1 ** 1 Mode 1 “ 1 Mode 6 12 Transmission/Reception of Program Change Messages Transmitting While holding down the FUNCTION button, press the keys corresponding to the Croup, Bank, and Number which make up the Program Change message you wish to transmit. 1 ~~ 1 d While holding Croup A Group B you want \ 2 Number 4 5 6 7 8 V 3 Number 4 5 6 7 8 1 i 4 5 6 7 8 1 65 66 67 68 69 70 71 72 2 9 10 11 12 13 14 15 16 2 73 74 75 76 77 78 79 80 3 17 15 19 20 21 22 23 24 3 81 82 83 84 85 86 87 88 4 c 25 26 27 28 29 30 31 32 .* 4 89 90 91 92 93 94 95 96 m 5 33 34 35 36 37 38 39 40 n 5 97 98 99 100 101 102 103 104 6 41 42 43 44 45 46 47 48 6 105 106 107 108 109 110 111 112 7 49 50 51 52 53 54 55 56 7 113 114 115 116 117 118 119 120 6 57 58 59 60 61 62 63 64 8 121 122 123 124 125 126 127 128 1 In the Mode 3 Transmission/Reception mode, the appropriate Program Change message will be transmitted whenever you press a Voice button. 1 PIANO 13 PIANO + VIBRAPHONE 32 HARPSICHORD + STRINGS 3 HARPSICHORD 14 PIANO + E.PIANO 46 VIBRAPHONE + E.PIANO 5 VIBRAPHONE 15 PIANO + PIPEORCAN 47 VIBRAPHONE + PIPEORGAN 6 E.PIANO 16 PIANO + STRINGS 48 VIBRAPHONE + STRINGS 7 PIPEORCAN 29 HARPSICHORD + VIBRAPHONE 55 E.PIANO + PIPEORGAN 8 STRINGS 30 HARPSICHORD + E.PIANO 56 E.PIANO + STRINGS 11 PIANO + HARPSICHORD 31 HARPSICHORD + PIPEORGAN 64 PIPEORGAN + STRINGS Receiving When a Program Change message is received, a change is made to the correspondingly numbered Voice, as shown below. 1 PIANO 13 PIANO + VIBRAPHONE 32 HARPSICHORD + STRINGS 3 HARPSICHORD 14 PIANO + E.PIANO 46 VIBRAPHONE + E.PIANO 5 VIBRAPHONE 15 PIANO + PIPEORGAN 47 VIBRAPHONE + PIPEORGAN 6 E.PIANO 16 PIANO + STRINGS 48 VIBRAPHONE + STRINGS 7 PIPEORGAN 29 HARPSICHORD + VIBRAPHONE 55 E.PIANO + PIPEORGAN 8 STRINGS 30 HARPSICHORD + E.PIANO 56 E.PIANO + STRINGS 11 PIANO + HARPSICHORD 31 HARPSICHORD + PIPEORGAN 64 PIPEORGAN + STRINGS Program Changes except those mentioned above will be ignored. 13 Troubleshooting Whenever you suspect that the instrument is not performing as it should, please consult the following information. Q. No sound heard from speakers. A. »Have you checked to make sure you don't have the volume set at "MIN"? • Do you possibly have headphones connected? •If using other connected MIDI devices, have you made sure the power is ON for all such devices? • If in the Multi-Timbral mode, do you have the Transmit channel set to something other than 1, 11, 12, 13, 14, or 15 ? Q.The damper effect is constantly applied to notes played (they continue sounding longer than normal). Or, the damper effect cannot be obtained at all. A. Have you checked to make sure the cable from the stand is connected properly to the piano? Refer to "Assembling the 135 Stand for the HP-135," page 4. Q. Notes played on the keyboard are too high (or low) in pitch. A. «Have you checked to make sure that key transposition is not in effect? (If Key Transpose has been set, the indicator on the FUNCTION button will be lit.) To exit the transposed state, press the FUNCTION button. (Its indicator should be out.) • Do you have the Master Tuning set appropriately? Q. Data that was in the recorder has disappeared. A. »The performance data that you record into the recorder will be erased approx. 8 hours after power is turned off. Regrettably, there is no way to restore such data once it has been erased. If you need a more permanent form of storage for your songs, you will need to use a sequencer and store songs on floppy disks. • Have you possibly pressed the PLAY and REC buttons at the same time? Q.The pitch differs from what it should be with "ISM" related products, or another manufacturer's sound generating unit. A. Check to make sure that the Tuning knob on the rear of the unit hasn't been inadvertently moved. Adjust the tuning knob until the piano's pitch matches that of the external uni...