Tune to the desired channel using the CHANNEL UP/DOWN buttons or go directly the 0-9 buttons 2. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until “MANUAL MEMORY XX ERASE” is displayed on screen. To STORE a channel, press the button until the MANUAL MEMORY XX ADD is displayed on screen. TURNING THE VOH802 DL ON AND OFF 1 Sliding the screen release lock forward viewing will unlock the screen and it will drop down slightly. (Pivot the screen downward until a comforta

3. (B) To tune weak or marginal channels with the CHANNEL UP/DOWN buttons , press the SKIP/ SEARCH button on the Remote Control Unit until “SKIP MODE OFF” is displayed on the bottom of the screen. Tune to the desired channel using the CHANNEL UP/DOWN buttons or go directly to the channel by using the 0-9 buttons on the Remote Control. -9 128-6117 9 of 16 4. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until “MANUAL MEMORY XX ERASE” is displayed on screen. To STORE

-9 128-6423 9 of 16 Operation Overhead Dome Lights The lights integrated into the VOH703 are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on. The off position will prevent the lights from turning on at all times and the auto position will allow the lights to turn on and off with the vehicle’s interior lighting. Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery.

Using a fingernail, lift the battery cover off. Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed. Align the cover tabs with the remote control and press down until the cover clicks. The remote control will operate the VOH1012 and most Audiovox VCP’s. It is not a universal remote control and will not control equipment from other manufacturers. -6128- 7288 6 of 16 Remote Control Function Descriptions *Function control is available on the unit and the remote

System adjustments can be accomplished using the remote control, while seat- belts remain fastened. Enjoy your Audiovox entertainment system but remember the safety of all passengers remains the number one priority. Features • •••••10.2 Inch TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor • •••••OSD (On Screen Display) for Control of Picture Quality and Functions • ••••• Input for Optional TV Tuner* • •••••Full Function Remote Control • •••••Infrared Transmitter for

Once the desired adjustment bar is displayed, use the -/+ buttons to adjust the selected function. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is pressed. 37. (-) Button* Use this button to decrease the level of the selected picture adjustment. 38. (+) Button* Use this button to increase the level of the selected picture adjustment. 39. NUMBER Buttons*** Allows the user to enter numbers 0 to 9 for direct access to TV channels. 40. I

Some of the steps that may be required are: A) Removal of the vehicle's dome light B) If the trim ring will be used, it may have to be trimmed to fit the contour of the vehicle's headliner. Refer to the "Trim Ring Installation" section in this manual. TRIM RING INSTALLATION: Note: This page only covers special installation considerations for thick trim ring installation. If the video monitor is to be installed in a vehicle with the thick trim ring, it may need to be trimmed to fit the contour of

Contents.......................................................................................3 D.Positioning the Monitor.................................................................3 E.Controls/Indicators/Connectors...................................................4 F. Powering the Unit.........................................................................4 G. Connecting the Monitor................................................................5 H. Using External Audio/Video Sources (R

The rear observation camera image turns off automatically any time the gear selector is moved out of the reverse position. B. If you want to view the rear observation camera image at any other time, press and hold switch button 2 on the rearview mirror. The image will remain on as long as switch button 2 is held on. Releasing the switch button #2 will turn off the image. C. The mirror/monitor can be used as regular glass rearview mirror. III. How to play an external audio or video signal 1. You