Pull the ends of the TENSION CABLE(22) and SENSOR WIRE(26) out of the MAIN FRAME(1). Refer to the inset drawing. Connect the CABLE END of the TENSION KNOB(23) into the SPRING HOOK on the end of the TENSION CABLE(22). Pull on the Cable of the TENSION KNOB(23) firmly so that enough cable is available to insert the cable through the slot in the BRACKET. Then insert the METAL FITTING on the cable of the TENSION KNOB(23) into the hole at the end of the slot in the BRACKET. Adjust the TENSION KNOB(23)

NOTE: Be careful not to damage the wires when attaching the METER(27). 10 11 Locate and read the WARNING LABEL(71) on the Magnetic Recumbent 1350 Bike. Make sure that all users read the WARNING LABEL(71). EQUIPMENT MAT Please note the Rear Frame of the Recumbent Bike is adjustable. Use the longest size to determine the size of the mat. CAUTION: SET UP INSTRUCTIONS Place the Magnetic Recumbent 1350 Bike in the area where it will be used. It is recommended that the Magnetic Recumbent 1350 Bike be

Contact us FIRST! If a part is missing or defective, please call us toll free at 1-800-375-7520 (in the U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday. If you would like to contact us on-line, go to our website at and access the Customer Service section. Be sure to have the name and model number of the product available when you contact us. Right Pedal Main Frame H

(These dimensions may vary up to one inch.) An area 4 feet wide x 6.5 feet long is required for safe operation of the Air Fusion 4525 Bike. Make sure that adequate space is available for access to and passage around the Air Fusion 4525 Bike. LEVELING: MOVING: FUNCTION INSPECTION: Visually inspect the Air Fusion 4525 Bike to verify that assembly is as shown in the above illustration. Check the function of the Air Fusion 4525 Bike by turning the crank slowly through one complete revolution to veri

Place your hands at a comfortable position on the handlebars. Simply move your highest foot forward and follow the natural path of the machine. Start on a load level that is comfortable to familiarize yourself with the machine. Once you are comfortable, start adjusting the load level to achieve the workout desired. Forward and Reverse The Air Cross Trainer 1725 Elliptical can be used in the forward and reverse direction to vary the muscles that you work out. This will also vary your workout help

Consult a physician before beginning any exercise program with this equipment. If you feel faint or dizzy, immediately discontinue use of this equipment. Serious bodily injury can occur if this equipment is not assembled and used correctly. Serious bodily injury can also occur if all instructions are not followed. Keep others and pets away from equipment when in use. Always make sure all bolts and nuts are tightened prior to each use. Follow all safety instructions in this manual. When calling f

55-1531) Pro Inversion System (Model Nos. 55-1536, 1536A and 1536B) 55-1531 55-1536 & 55-1536A 55-1536B During exercise, the unit may break at a weld in the center of the Inversion Table causing a person to fall off the Inversion Table and possibly injure himself or herself. The Inversion Tables have the name “Inversion Therapy Table” or “Pro Inversion System.” Only Inversion Tables with the following serial numbers are part of this recall: • “Inversion Therapy Table”: 05NOV000001 through 0

Stamina Products will arrange to pick up the Inversion Table and offer you a replacement or refund. If you have any questions regarding this recall, you may call 888-STAMINA (888-782-6462).

Stamina Products will arrange to pick up the Inversion Table and offer you a replacement or refund. If you have any questions regarding this recall, you may call 888-STAMINA (888-782-6462).

Stamina Products will arrange to pick up the Inversion Table and offer you a replacement or refund. If you have any questions regarding this recall, you may call 888-STAMINA (888-782-6462).