THIS GAS ACCESSORY IS DESIGNED FOR OUTDOOR USE ONLY IMPORTANT THIS MANUAL SHOULD BE READ THOROUGHLY BY THE PERSON INSTALLING THE GRILL MOUNTING AND ALL PERSONS WHO WILL USE AND MAINTAIN THE GRILL MOUNTING. THE INSTALLER SHOULD BE SURE THE MANUAL IS LEFT IN THE POSSESSION OF THE USER. THE USER SHOULD RETAIN THIS MANUAL FOR FUTURE REFERENCE WHEN USING OR CLEANING THE GRILL MOUNTING AND TO PROPERLY IDENTIFY ANY REPAIR PARTS THAT MAY BE REQUIRED. WARNING REFERENCE THIS MANUAL FOR PROPER INSTALLATION

FOR ASSISTANCE OR ADDITIONAL INFORMATION CONSULT A QUALIFIED INSTALLER, SERVICE AGENCY OR THE GAS SUPPLIER. CAUTION: THE GRILL AND ITS INDIVIDUAL SHUTOFF VALVE MUST BE DISCONNECTED FROM THE GAS SUPPLY PIPING SYSTEM DURING ANY PRESSURE TESTING OF THAT SYSTEM AT TEST PRESSURES IN EXCESS OF 1/2 PSIG. CAUTION: THE GRILL MUST BE ISOLATED FROM THE GAS SUPPLY PIPING SYSTEM BY CLOSING ITS INDIVIDUAL MANUAL SHUTOFF VALVE DURING ANY PRESSURE TESTING OF THE GAS SUPPLY PIPING SYSTEM AT TEST PRESSURES EQUAL

Please take time to read this entire manual before installing your premium Broilmaster® Front Shelf Kit. Important Information Important: This manual should be read thoroughly by the person installing the shelf kit AND ALL PERSONS WHO WILL USE AND MAINTAIN THE SHELF KIT. THE INSTALLER SHOULD BE SURE THE MANUAL IS LEFT IN THE POSSESSION OF THE USER. THE USER SHOULD RETAIN THIS MANUAL FOR FUTURE REFERENCE WHEN USING OR CLEANING THE SHELF KIT AND TO PROPERLY IDENTIFY ANY REPAIR PARTS THAT MAY BE

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE BISTRO 4500 BY: SHERWOOD INDUSTRIES LTD OWNER’S MANUAL NOTE: This appliance must not be used indoors. WHAT TO DO IF YOU SMELL GAS • Open windows/extinguish any open flame. • Do not try to light any appliance. • Do not touch any electrical switch or use any phone in your building. • Immediately call your gas supplier from a neighbour’s phone. Follow the gas supplier’s instructions. • If you cannot reach your gas supplier, call the fire departmen

Page 4 B101074-0-1006 B101074-0-1006 Page 5 All repair part orders should be placed through your local Broilmaster dealer. To locate a dealer in your area, contact Broilmaster Customer Service at 800-851-3153. To ensure prompt and accurate service, please provide the following information when placing a repair part order: Model Number, Part Name, Part Number, and Quantity of parts needed. REMOVE PROTECTIVE COATING FROM STAINLESS STEEL PARTS STARTING AT POP RIVETS AND VERIFY THAT ALL PARTS LISTED

Stainless steel surfaces may be cleaned with a spray- on stainless steel cleaner available at most hardware stores. Important: Do not use harsh or abrasive cleaners! Your post has a highly polished surface and may be easily scratched. PERIODIC INSPECTION AND MAINTENANCE Periodic inspections and maintenance are essential. All Broilmaster Gas Grill products or mechanical devices eventually begin to wear due to environment, contaminants, corrosion or aging. Inspect all components at least twice per

Broilmaster® protective covers are recommended. Stainless steel components can be easily cleaned with a spray-on stainless steel cleaner found in most hardware stores. Briquettes If the briquettes did not come clean during burn off, after cooling turn them over. The residue will burn off during warm-up for the next use. Page 20 B100691-0-0103 TROUBLESHOOTING TROUBLESHOOTING Although the manufacturer has attempted to ensure that your grill will operate properly and satisfactorily, sometimes probl

DELUXE "D" SERIES PARTS LIST DELUXE "D" SERIES PARTS LIST Index Part Description D3BL-1 D4BL-1 1 Grill Body Top (with Heat Indicator, Hinge and Bridge Pins) B100453 B073286 1 Grill Body Top (casting only) B100456 B076621 2 Heat Indicator (stainless) B076625 B076625 3 Lid Handle (painted) B100601 B100601 4 Foam Grip B073097 B073097 5 Retract-A-Rack (chrome) B100594 B060757 6 Cooking Grid (set of 3) DPP11 DPP12 6 Cooking Grid (single) B100468 B100497 7Briquette Bag B058122 B058122 8 Briquette Rack

FIGURE 2. Anchor the base to your patio using the two holes provided in the base. (Hardware not included) Note: Make sure that the large rectangular cut out is facing in the direction that you want your grill to face. FIGURE 2. 8 FIGURE 1 3 7 • Two adjustable wrenches or a socket set • A medium Phillips screwdriver • Pipe thread sealer or Teflon tape (for gas connections) • Soapy water solution (to test for leaks) Attach four .-20 x 4" eyebolts (7) to the bottom of the square post using hex head

EMPIRE COMFORT SYSTEMS, INC • 918 FREEBURG AVE. • BELLEVILLE, IL 62220 B100999-1-0906 PC2CART-1, DC2CART-1 INSTALLATION INSTRUCTIONS VERIFY THAT ALL PARTS LISTED ON THE EXPLODED VIEW OF THIS MANUAL HAVE BEEN INCLUDED IN THIS CART BEFORE BEGINNING INSTALLATION. CAUTION: USE CAUTION WHEN HANDLING PARTS, AS THEY MAY CONTAIN SHARP EDGES. WORK GLOVES ARE RECOMMENDED TO PREVENT INJURY. TABLE OF CONTENTS CONGRATULATIONS! You have chosen the finest grill for your outdoor cooking pleasure. Please take ti